☎ 064 510 9495 💬 WhatsApp
Mon–Fri 08:00–18:00 · Sat 08:00–12:00 · 170 Victoria Rd, Woodstock
HomeGas Installation › Gas Geyser Installation

Gas geyser installation in Cape Town, COC included.

Hot water that keeps running when the grid does not. Gas line, flue, water connection and pressure test, sized to the cylinder bank the geyser actually needs, with the Certificate of Compliance issued on the same visit.

Registered with
SAQCC Gas
Built to
SANS 10087
Installation
From R3,500
Runs on
19kg to 48kg
Dewhot gas geyser installed in a galvanised weather housing on a Cape Town wall by Red Flame Gas Supplier, with a copper gas line and labelled shut-off valve

Dewhot geyser, installed and commissioned in a galvanised housing before the Certificate of Compliance was signed.

SANS 10087Every gas line, flue and water connection is fitted and tested to the national gas installation standard.
SAQCC registeredThe work is done by a registered gas practitioner, not a general handyman.
COC on the dayThe Certificate of Compliance is issued on the same visit, once the pressure test passes.
Any brand installedYou buy the geyser from your own supplier. We connect, certify and keep it running with refills.

What a gas geyser installation involves.

Running the gas line from the cylinder or bank to the geyser, fitting the flue for safe exhaust venting, connecting the water inlet and outlet, pressure testing the full system for leaks, and signing the Gas Certificate of Compliance once everything passes. Internal geysers need proper ventilation checked against SANS 10087. External units mounted on an outside wall are the simpler and more common installation in Cape Town, from Woodstock and the City Bowl to the Atlantic Seaboard and the Southern Suburbs.

Gas union and isolation valve being fitted by hand during a gas geyser installation
Gas burner ring running a clean blue flame after commissioning

From your first message to the certificate, usually one visit.

A standard geyser installation is a single appointment. Nothing is signed off until the system holds pressure and the burner runs a clean blue flame.

Step 1

Send your property

WhatsApp your bathroom count, property type and where the cylinder can sit. You get a starting price and a booking.

Step 2

Run the gas line and flue

Gas line, flue venting and water connection fitted, sized to the cylinder bank the geyser actually needs.

Step 3

Pressure test

The full system is put under pressure and held, then the burner is checked for a clean blue flame.

Step 4

COC in your hand

The Gas Certificate of Compliance is completed and handed over before we leave. That is the document your insurer asks for.

Why Cape Town homes use Red Flame for a gas geyser.

We are a gas shop first. The installation is how most customers meet us, and the refills are why they stay.

Hot water through load shedding

A gas geyser runs on LPG, not mains electricity, so hot water keeps flowing through every load shedding stage.

One visit, not three

Assessment, installation, pressure test and the certificate are the same appointment for a standard setup.

We supply the gas side

Cylinders, regulator and a cage where the setup needs one, all from our Woodstock shop at 170 Victoria Road.

Refills afterwards

Once the geyser is running we deliver 19kg and 48kg refills free across our Cape Town area, on your schedule.

Which cylinder size you need.

19kg is the minimum for a single-bathroom household running a gas geyser. Larger households, or homes with more than one bathroom, usually need a 48kg cylinder or a bank of two.

19kg single cylinder

The minimum size for a single-bathroom household. It runs the geyser, but you are on a tighter refill schedule and more exposed to running dry mid-shower on a cold morning.

48kg cylinder, or a bank of two

Recommended for larger households or more than one bathroom. Two cylinders with an auto-changeover valve mean the geyser switches to the second bottle automatically when the first runs dry, so you WhatsApp us for a refill on your own schedule instead of an emergency one.

Where a gas geyser can actually go.

A flue to the outside and permanent ventilation, every time

A gas geyser burns air and vents combustion gases, including carbon monoxide, so where it can go is decided by flueing and ventilation rather than by convenience. It can go in a bathroom, but only where it is flued to the outside and the room has permanent ventilation that nobody can close off. What it cannot do is sit sealed inside a cupboard or in a room with no fixed air supply. That is what catches out renovations, because a sealed cupboard is usually exactly where the old electric geyser sat.

Worth confirming before the cupboard or the tiling goes in, not after. If you are planning a renovation, send us the layout and we will tell you where the geyser and its flue can go, and what ventilation that spot needs.

Rinnai Infinity gas geyser wall mounted in open air on the outside of a Cape Town house, with the gas line and water connections below it

What a gas geyser installation costs.

From R3,500 for a standard external installation, which is a starting price rather than a fixed quote. Larger households, internal ventilation work or longer pipe runs push it up, typically into the R3,500 to R9,500+ range depending on the site.

ServiceFrom (ZAR)Not Included
Gas geyser installationR3,500Appliance, cylinders, and cage if required
Gas cage supply & fit (for geyser cylinder bank)R1,450Cylinders
Certificate of ComplianceR950Repairs found on inspection, quoted separately

A starting price, not a fixed quote. The final number comes from the on-site assessment. You buy the geyser from your own supplier, and we supply the cylinders and a cage where one is required. Full installation pricing for other appliances is on our gas installation page.

What moves the price.

  • Internal or external mounting. An internal unit needs a balanced flue and more ventilation work.
  • Cylinder size. A single 19kg cylinder is cheaper to set up than a 48kg bank with auto-changeover.
  • Flue routing. The further the flue has to run to a safe outside point, the more it costs.
  • Existing pipework. Old pipe or an unsafe previous installation gets quoted separately.
  • Access. A ground-floor Woodstock flat is quicker than a third-floor unit with no lift.
  • Distance from the cage to the geyser. Every extra metre of gas line adds material and labour.

Gas geyser brands we install.

You buy the geyser from your own supplier, and we connect and certify any brand. These are the three we fit most often in Cape Town homes.

Rinnai Dewhot Typhoon

Geysers we've commissioned in Cape Town.

Our own work, not stock photos. This is what a finished installation looks like at sign-off.

Typhoon gas geyser mounted on a Cape Town wall by Red Flame Gas Supplier, with the digital temperature display fitted
Typhoon geyser, mounted and commissioned with the temperature display set before handover.
Two-cylinder gas bank installed in a galvanised cage by Red Flame Gas Supplier, with the auto-changeover regulator fitted
Two-cylinder bank in a galvanised cage, with an auto-changeover regulator fitted, exactly the setup recommended above for larger households.

Gas geyser questions Cape Town customers ask.

How much does a gas geyser installation cost in Cape Town?
From R3,500 for a standard installation, including the COC. That is a starting price. The final number is quoted after an on-site assessment, because it depends on cylinder size, flue routing and whether the installation is internal or external. You buy the geyser from your own supplier. We supply the cylinders and the cage. WhatsApp your property type for an exact quote.
What size gas cylinder does a gas geyser need?
19kg minimum for a single-bathroom household, 48kg for larger households or more than one bathroom. We recommend two cylinders with auto-changeover so hot water never runs out mid-shower. Red Flame supplies and refills both sizes from our Woodstock shop.
Does a gas geyser work during load shedding?
Yes. A gas geyser heats water on LPG, not mains electricity, so it keeps working through every load shedding stage. It is one of the few home appliances that is fully unaffected by the grid.
Do I need a COC for a gas geyser?
Yes. A gas geyser installation is a permanent LPG connection under SANS 10087 and legally requires a Gas Certificate of Compliance. We issue it on the same visit once the installation passes the pressure test.
How long does a gas geyser installation take?
Typically half a day for a standard installation, including the gas line, flue, water connection, pressure test and the paperwork for the COC. We confirm a time window when you WhatsApp the job details.

Gas geyser installations across Cape Town.

We install and certify from our Woodstock shop at 170 Victoria Road. These are the areas we cover most, and each page carries the gas delivery and installation detail for that suburb.

Need a gas geyser installed in Cape Town?

WhatsApp your suburb, bathroom count and property type. We confirm a site visit and quote before any work starts.

💬
☎ Call 💬 Get a Quote